Yamaha PLG150-AP Bedienungsanleitung Seite 14

Selecting AP Voices (XG Plug-in System)
3
Enable the PLG150-AP board for the desired Part.
First, make sure that the appropriate Part is selected (using the [PART -/+] buttons), then press the
[SELECT] button. The icon of the selected board appears in the display and the corresponding
LED at the bottom of the panel (PLG-1, -2, or -3) flashes briefly.
4
Select the desired bank number.
Move the cursor to the Bank Number parameter with the [SELECT </>] buttons and use the
[VALUE -/+] buttons to select the desired bank.
5
Select the desired voice number.
Move the cursor to the Voice (Program) Number parameter with the [SELECT </>] buttons and
use the [VALUE -/+] buttons to select the desired voice.
NOTE
Alternately, you can select voices from a connected MIDI keyboard, or from sequencing software
on a connected computer.
For a list of available voices and their bank/voice numbers, see page 20.
14
PLG150-AP Owner's Manual
• Voice (and Voice banks) can also be selected by using the Voice Category buttons.
• AP-XG/A : 106
• AP-XG/B : 106
• Preset : 001
AP-XG/A
Bank Number parameter
AP-XG/B Preset