Spare Parts; Disposal; Information On The Collection Of Used Electrical And Electronic Products - Wilo Rexa MINI3 serie Einbau- Und Betriebsanleitung

Spare parts

Delivery rate drops while the pump is running
Customer service
If the points listed here do not rectify the fault, contact customer service. Costs may
be incurred when using customer service support! Please contact customer services
for more information.
11 Spare parts
Spare parts are ordered via customer service. To avoid return queries and incorrect or-
ders, the serial or article number must always be supplied. Subject to change without
prior notice!
12

Disposal

12.1

Information on the collection of used electrical and electronic products

Proper disposal and appropriate recycling of this product prevents damage to the en-
vironment and danger to your personal health.
NOTICE
Disposal in domestic waste is forbidden!
In the European Union, this symbol can appear on the product, the packaging or
the accompanying documentation. It means that the electrical and electronic
products in question must not be disposed of along with domestic waste.
To ensure proper handling, recycling and disposal of the used products in question,
please note the following points:
▪ Only hand over these products at designated, certified collecting points.
Installation and operating instructions Wilo-Rexa MINI3
⇒ Install a bleed unit in the pressure pipe.
1. Pressure pipe/discharge pipe clogged
⇒ Flush out the pressure pipe.
⇒ Flush out the pressure hose.
⇒ Remove any kinks in the pressure hose.
2. Strainer blocked with sand/clogged
⇒ Shut down the pump, remove it and clean it.
3. Air in the pump/pressure pipe
⇒ Position the pump at a slight angle to allow air to escape.
⇒ Install a bleed unit in the pressure pipe.
4. Signs of wear
⇒ Contact customer service.
en
55