Replacement Parts And Wearing Parts; Warranty / Service - Beurer BM 47 Gebrauchsanweisung

The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notifica-
tion to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
(In accordance with IEC 61000-4-2, IEC 61000-4-3, IEC
61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 610004-8
and IEC 610004-11) and is subject to particular precau-
tions with regard to electromagnetic compatibility (EMC).
Please note that portable and mobile HF communication
systems may interfere with this unit.
• This device is in line with the EU Medical Devices Direc-
tive 93/42/EEC, the „Medizinproduktegesetz" (German
Medical Devices Act) and the standards EN 1060-1 (non-
invasive sphygmomanometers, Part 1: General require-
ments), EN 1060-3 (non-invasive sphygmomanometers,
Part 3: Supplementary requirements for electro-mechani-
cal blood pressure measuring systems) and IEC 80601-2-
30 (Medical electrical equipment – Part 2 – 30: Particular
requirements for the safety and essential performance of
automated non-invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.

11. Replacement parts and wearing parts

Replacement parts and wearing parts are available from
the corresponding listed service address under the stated
material number.
Designation
Standard cuff (22-35 cm)
XL cuff (30-42 cm)

12. Warranty / service

In case of a claim under the warranty please contact your
local dealer or the local representation which is mentioned
in the list "service international".
In case of returning the unit please add a copy of your
receipt and a short report of the defect.
The following warranty terms shall apply:
1. The warranty period for BEURER products is either 5
years or- if longer- the country specific warranty period
from date of Purchase.
In case of a warranty claim, the date of purchase has to
be proven by means of the sales receipt or invoice.
29
Item number and/or
order number
162.139
162.795