Parkside PWSA 12 B1 Originalbetriebsanleitung Seite 30

GB IE
these are connected and
properly used. Use of dust
collection can reduce dust-
related hazards.
Power tool use and care:
• Do not force the power
tool. Use the correct
power tool for your ap-
plication. The correct power
tool will do the job better and
safer at the rate for which it
was designed.
• Do not use the power
tool if the switch does
not turn it on and off.
Any power tool that cannot
be controlled with the switch
is dangerous and must be re-
paired.
• Disconnect the plug from
the power source and/
or the battery pack
from the power tool be-
fore making any adjust
-ments, changing acces-
sories, or storing power
tools. Such preventive safety
measures reduce the risk of
starting the power tool acci-
dentaIly.
• Store idle power tools
out of the reach of chil-
dren and do not allow
persons unfamiliar with
the power tool or these
instructions to operate
the power tool. Power
tools are dangerous in the
hands of untrained users.
• Maintain power tools.
Check for misalignment
or binding of moving
30
parts, breakage of parts
and any other condi-
tion that may affect the
power tool's operation.
If damaged, have the
power tool repaired be-
fore use. Many accidents
are caused by poorly main-
tained power tools.
• Keep cutting tools sharp
and clean. Properly main-
tained cutting tools with sharp
cutting edges are less Iikely to
bind and are easier to control.
• Use the power tool, ac-
cessories and tool bits
etc. in accordance with
these instructions, tak-
ing into account the
working conditions and
the work to be per-
formed. Use of the power
tool for operations different
from those intended could re-
sult in a hazardous situation.
Service:
• Have your power tool
serviced by a qualified
repair person using only
identical replacement
parts. This will ensure that
the safety of the power tool is
maintained.
Warning! Observe the
safety infor-mation
in the operating in-
structions for your
Parkside X 12 V Team
series rechargeable
battery.