Inspection And Test Log Book For The Door System; Testing Of The Garage Door Operator - Becker BOM 850C-II Handbuch

Inspection and test log book for the door system

Owner / operator
Location of door system:
Operator data
Operator type:
Manufacturer:
Door data
Type:
Serial no.:
Door dimensions:
Installation and initial operation
Company, installer:
Initial operation on:
Miscellaneous

Testing of the garage door operator

! Caution:
An inspection is not the same as maintenance! After an inspection, the user must do any necessary
maintenance.
Drive-controlled garage doors are to be inspected and maintained periodically by qualifi ed, trained and experienced personnel.
The manufacturer's specifi ed inspection and maintenance intervals must be observed. Observe all applicable national regulations
(ASR 1.7 'Technical Regulations for Workplaces - doors and gates'). All inspection and maintenance work must be documented
in the enclosed inspection and test report. The operator/owner is obliged to store the inspection and test report together with
the documentation for the garage door operator for the entire service life of the system. The installer must fi ll out the log book
completely and give it to the operator/owner before the operator/owner puts the door into service. This recommendation includes
manually operated doors. All guidelines and instructions for the garage door operator (installation, operation and maintenance,
etc.) must be strictly followed. The manufacturer's guarantee becomes null and void in the event that inspection/maintenance
has not been carried out. Alterations to the garage door operator (in as far as permitted) must also be documented.
Inspection and test log book for the door system
Manufacture date:
Operating mode:
Year of construction:
Door leaf weight:
Name, installer:
Signature:
Changes
51