Complete The Installation Procedure - Becker BOM 850C-II Handbuch

Installation
Menu A:
Set open time
Only in conjunction with function 'Automatic close'.
1. Select menu item "A".
After approximately 2 seconds, the display fl ashes and shows the set value of the operating mode.
2. If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C) buttons.
Menu value Open time (without warning time 10 seconds)
0 0 s
1 10 s
2 30 s
3 60 s
4 90 s
5 120 s
6 150 s
7 180 s
8 210 s
9 240 s
3. Press the programming button (PROG button) (D).
The number "0" is displayed.
4. Proceed with the force learning cycle.

Complete the installation procedure

1. Close the cover of the drive head.
2. Check if the garage door operates properly and safely. Refer to the section 'Maintenance / Checks'.
46