Connecting The Headphones To A Second Bluetooth ® Device - Silvercrest SBK 4.1 B2 Bedienungs- Und Sicherheitshinweise

off if they do not detect a Bluetooth
4 beeps.
Now connect your communication device (mobile phone or com-
puter) via Bluetooth
in the instructions for your communication device. Select the entry
"SBK 4.1 B2" from the list of devices detected by your computer
or mobile.
Once the connection has been established, the LED will briefly
flash blue twice every 3 seconds.
Please note, your communication device must support Bluetooth
Standard 4.1 to use all options.
If you come into range of the paired device with the headphones
switched on, a Bluetooth
established.
You may need to approve the connection on the communication
device. Please refer to the instructions for use of the communication
device on this topic!
If you leave the range of your communication device with your
headphones, the LED will flash blue once every 2 seconds. If the
connection is not restored within 5 minutes, the headphones will
switch off.
The headphones may be manually switched off by holding the
button for 3 seconds until 4 beep sounds and the LED goes out.
9
Connecting the headphones to a second
Bluetooth
The headphones may be connected to two Bluetooth
devices at the same time. If the headphones are already connected to
a device, follow the steps below to connect to the second device:
34 GB/IE
with the headphones. Please refer to the notes
®
connection will automatically be
®
device
®
device to connect to and sound
®
communication
®
®