Before use
Before use, verify the package contents are complete and
undamaged!
Charging the battery
The battery must be charged prior to first use.
The LED
will flash red and headphones sound acoustic signal
5
when the battery is drained. The battery should then be charged
as soon as possible.
Plug the micro-USB plug
on the charging cable into the micro-
13
USB charging socket
on the headphones! Plug the USB plug
11
12
on the charging cable into the USB port on a PC or a USB adapter
(not included).
Note: The LED will remain red whilst charging. Once the battery
is fully charged, the LED will remain blue.
Once charging has completed, remove the micro-USB plug from
the headphones.
Using the headphones
Connect the headphones with a communication device.
Place the headphones near a switched on communication device
(e.g. mobile or computer).
Pairing with a new Bluetooth
device: Hold the
button
for
®
9
approx. 6 seconds until the LED
flashes red and blue and acous-
5
tic signal sounds. This indicates the headphones are now in pairing
mode, which remains active for 5 minutes. The headphones will switch
GB/IE
33