Disposal Of The Packaging; Charging The Power Bank - Silvercrest SPBC 10 A1 Bedienungsanleitung

Disposal of the packaging

The packaging materials have been selected for their
environmental friendliness and ease of disposal, and
are therefore recyclable . Dispose of packaging
materials that are no longer needed in accordance
with applicable local regulations .
Dispose of the packaging in an environmentally
friendly manner .
Note the labelling on the packaging and separate
the packaging material components for disposal if
necessary . The packaging material is labelled with abbreviations
(a) and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites .

Charging the power bank

Before using the power bank, the integrated battery must be fully
charged .
CAUTION
► Charge the device only in dry interior rooms .
► The power bank must never be charged and used for
charging an external device at the same time .
► Due to the high power consumption, the power bank must
be charged using a USB mains adapter . Do not charge the
power bank via the USB port of a PC or notebook .
► Use only a USB mains adapter with an output voltage of
5 V and an output current of at least 3 A to charge the
power bank .
► Always disconnect the charging cable 7 when charging is
complete!
♦ Connect the USB-A plug of the charging cable 7 to a
suitable USB power supply (not supplied) .
♦ Connect the micro USB plug of the charging cable 7 to the
micro USB charging port 4 on the power bank .
SPBC 10 A1
GB │ IE │ 23 ■