Disposal Of The Packaging; Charging The Power Bank - Silvercrest SPB 10.000 B2 Bedienungsanleitung

Disposal of the packaging

The packaging protects the device from damage
during transport . The packaging materials have been
selected for their environmental friendliness and ease
of disposal, and are therefore recyclable .
Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste that is generated .
Dispose of packaging materials which are no longer needed
in accordance with applicable local regulations .

Charging the power bank

Before using the power bank, the integrated battery must be
fully charged .
CAUTION
► Use the device only in dry interior rooms .
► The power bank must never be charged and used for
charging external devices at the same time .
► Due to the high current consumption, the power bank
must be charged using a USB mains adapter . Do not
charge the power bank via the USB port of a PC or
notebook .
► Use only a USB mains adapter with an output voltage
of 5 V and an output current of at least 2 A to charge
the power bank .
► Use only the supplied charger cable
power bank!
► Always disconnect the charger cable
is complete!
♦ Connect the USB plug of the charger cable
USB power supply (not supplied) .
♦ Connect the micro USB plug of the charger cable
micro USB charging port
estimate of the charge level is shown during charging by
means of the charge level LEDs
SPB 10.000 B2
to charge the
when charging
on the power bank . A rough
:
GB│IE│NI
to a suitable
to the
7 ■
│