DANGER
►
Packaging material should not be used as a play thing . There is a risk of
suffocation!
Disposal of the packaging
The packaging protects the device from transport damage . The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable .
The recirculation of packaging into the material circuit saves on raw material
and reduces the amount of waste generated . Dispose of packaging material
that is no longer needed as per the regionally established regulations .
NOTICE
►
If possible preserve the device's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the
device ideally for its return .
operating components
Display
Operating status display (charging slots 1 to 4)
2
USB Output
3
Operating status display (Li-ion batteries)
4
Charging contact for Li-ion batteries
5
Holder for Li-ion batteries
6
Charging slots for types AAA/AA/C/D (charging slots 1 to 4)
7
Handling and operation
In this chapter you will receive important information for the handling and
operation of the device .
Switching the appliance on/off
♦
Place the appliance on a smooth, level and slip resistant surface .
♦
Compare the technical details with those of your power supplier . If they
match, connect the mains cable to an easily accessible mains power socket .
The LEDs light up red three times . The battery charger is now ready for use .
♦
To switch off the battery charger, unplug the appliance from the mains
socket .
■
34
│
GB │ MT
TLGL 1000 B1