Led Display; Checking The Charge Level - Silvercrest SPBC 10 A1 Bedienungsanleitung

NOTE
► The power bank can also be charged via the USB-C port 6 .
To do this, you will need a separate USB-C cable and a
suitable USB power supply (not supplied) .
The charge level LEDs 3 provide a rough estimate of the charge
level during charging:

LED display

One LED is flashing
One LED is on, the second LED is flashing
Two LEDs are on, the third LED is flashing
Three LEDs are on, the fourth LED is flashing
All LEDs are on

Checking the charge level

You can also check the charge level of the power bank when it is
not charged or while it is being used for charging .
♦ Briefly press the ON/OFF button 2 once . The LEDs 3
show the current charge level of the power bank for about
30 seconds .
LED display
All LEDs are on
Three LEDs are on
Two LEDs are on
One LED is on
One LED lights up orange
All LEDs off
■ 24 │ GB │ IE
Charge level
< 25%
25 ‒ 49%
50 ‒ 74%
75 ‒ 97%
98 ‒ 100%
Charge level
76 ‒ 100%
51 ‒ 75%
26 ‒ 50%
10 ‒ 25%
< 10%
0%
SPBC 10 A1