4 Installing the software and configuring the WLAN card
Deactivating the Windows login
Fig. 4-3 Driver installation
Fig. 4-4 System restart
10
Installation Instructions for WLAN CEREC 3 Acquisition Unit
A dialog box with a message stating that the drivers will be installed
automatically then appears.
Confirm this dialog box with "OK".
6.
The installation is performed and its progress is indicated by a
progress bar. When the installation is finished, a dialog box stating that
the acquisition unit must be restarted appears.
Confirm this dialog box with "OK".
7.
The acquisition unit is then restarted automatically. The Windows
login window appears during power-up.
Confirm this login window without entering a password with "OK".
8.
9.
The installation is now completed.
4.2
Deactivating the Windows login
NOTE: Do not perform if a password is to be used
Perform the procedure described in this chapter only if you do not want to use
a password.
Click "Start" / "Run" in the task bar.
1.
Sirona Dental Systems GmbH
61 44 112 D 3439
D 3439.092.15.02.02 06.2007