3 Installing the WLAN card in the acquisition unit
8
Installation Instructions for WLAN CEREC 3 Acquisition Unit
3.
Cut off a strip from the harder Velcro strap that is approximately as long
as the antenna.
4.
Glue this strip of Velcro strap onto the inside of the rear panel at position
(A).
5.
Fasten the antenna to the rear panel with the Velcro strap.
CAUTION: Do not pinch any cables!
Pay attention to the cable routing when inserting the rear panel.
6.
Insert the rear panel.
Sirona Dental Systems GmbH
61 44 112 D 3439
D 3439.092.15.02.02 06.2007