Connection Test Via Ping Command - Sirona Cerec 3 Installationsanleitung Wlan

Sirona Dental Systems GmbH
Installation Instructions for WLAN CEREC 3 Acquisition Unit
61 44 112 D 3439
D 3439.092.15.02.02 06.2007
5

Connection test via ping command

Click "Start" / "Run" in the task bar.
1.
Fig. 5-1 DOS prompt
Enter "cmd" in the following window.
2.
Confirm with "OK".
3.
The DOS prompt window then opens.
Fig. 5-2 Example ping command
Enter the command "ping", followed by a space and the IP address of
4.
the milling unit. The IP address of the milling unit appears on the milling
unit display when you press the "Config" key.
5. Press the Enter key.
If the connection is intact, the display should have the following
contents.
5 Connection test via ping command
17