Moving With Lifting Truck; Loading By Forklift; Loading With A Crane; Transporting - CEMO KS-Mobil 400l Betriebsanleitung

5.2.1 Moving with lifting truck

The KS-Mobile can be
moved with the lifting
truck on a firm, level
surface.
The lifting point is
between the forklift
slots on the underside.
5.2.2 Loading with a forklift
Important!
i
Use the pro­
vided forklift
slots on the
underside as
lifting points
for safe lifting
with a forklift.

5.2.3 Loading with a crane

Danger!
A KS­Mobil can cause severe
injuries if it falls.
Do not stand under suspended
loads during crane operations.
Do not damage the pump cabinet
with the crane slings!
• the crane lugs provided at the top of the tank are
to be used for crane operations.
• attach 2 suitable load handling devices of equal
length to the crane lugs (minimum length 2 m).
• the KS-Mobile can be loaded onto or unloaded
from the transport vehicle.

5.3 Transporting

During transport, observe the pertinent regulations
for transport and securing loads, in particular:
• road traffic (licensing) act of the country
in question.
• CEN 12195 Parts 1 to 4 for calculation
and lashing.
Use the crane lugs for placing of the tension belts
when fastening to the transport vehicle.
i
Important!
Positive fit before traction!
First, try to positively load the equipment
(e.g. through striking the sides).
Recommendation:
Use a non-slip mat.
GB
23