Kessel Aqualift F Basic Einbau- Und Bedienungsanleitung Seite 80

Connect potential-free contact / remote signal generator
A potential-free contact can be connected at the con-
trol unit, available from Busch-Jäger (item no. 1515
U-12-101).
80 / 148 Pumping station / Installation and operating manual
After connecting the control unit to the mains, press the
alarm button (7) and pump button (9) simultaneously for 5
seconds.
The control unit beeps twice briefly to confirm that the
potential-free contact / remote signal generator can be
connected.
Connect potential-free contact / remote signal generator
to (T) and (U) per circuit diagram.
016-102_01 DE_EN_FR