Manual Operation - Kessel Aqualift F Basic Einbau- Und Bedienungsanleitung

7.2.4

Manual operation

(4) Manual operation LED
(5) Manual operation LED (only with Duo)
(9) Pump 1 button
(10) Pump 2 button (only with Duo)
Manual operation can be activated with button (9) / (10). The
wastewater pump is no longer switched on automatically.
If manual operation is switched on during the pumping
process, the wastewater pump switches off.
Activate manual operation
Press button (9) / (10), the manual operation LED (4) / (5)
flashes orange.
The wastewater pump can be switched on as follows when
manual operation is activated:
Switching on briefly
Press button (9) / (10) 1x.
✓ The wastewater pump will be switched on for a short
period.
88 / 148
Switching on for longer
Pumping station / Installation and operating manual
Press and hold button (9) / (10) for as long as the waste-
water pump should be switched on.
The wastewater pump will switch on.
If manual operation is not used for a certain period of time
(5 minutes), the control unit re-activates the automatic
operation.
016-102_01 DE_EN_FR