Connecting The Oven - hanseatic 10153.3eETsDpHbX Gebrauchsanleitung

Page EN-24 Installation
– Your built-in furniture may need to be mod-
ified. If you do not have the manual skills
to do this, you should hire a professional.
– Veneers or plastic coverings on the built-
in furniture require heat-resistant adhesive
(100 °C). If the adhesive and surfaces are
not heat-resistant, the covering may warp
and come loose.
– An intermediate shelf is required if a draw-
er is to be installed below the oven.
– The installation recess must have the fol-
lowing minimum dimensions:
Installation under a worktop
Installation in an upright cabinet
All dimensions in mm

Connecting the oven

Depending on the installation recess, the
oven must be connected before or after in-
stallation.
– For the electrical connection of the oven, a
professional must install an earthed power
socket with a separate fuse with sufficient
protection (230 V~/50 Hz/16 A).
– The socket must be installed in way that
does not affect the depth of the installation
recess when the oven is plugged in.
– Do not use multi-plugs or extension cables.
1. Switch off the socket for the oven before
installation. To do this, unscrew and/or
switch off the fuse for the socket.
2. Set all oven switches to zero.
3. Insert the mains plug into the socket.