Fully Automatic Mode - hanseatic 10153.3eETsDpHbX Gebrauchsanleitung

Fully automatic mode

This operation is used to select the desired
cooking time as well as when the dish should
be finished cooking and the oven should be
switched off. The timer automatically calcu-
lates the switch-on time.
Setting switch-off and cooking
time
1. With the oven off, press and hold the
MENU button until the display shows
"0·00" and the bell symbol flashes
2. Briefly push the MENU button again.
The display alternates between "dvr" and
"0·00".
3. Use the arrow keys to set the desired
cooking time (e.g. 1:15). Press and hold
each arrow key to go forwards/backwards
more quickly.
4. Press the MENU once again. This will
cause the display to alternate between
"End" and the current time plus the set
operating time. g
5. Use the arrow keys to set the desired
switch-off time (e.g. 12:45). The switch-off
time can be max. 23:59 hours from the
current time.
6. Press the MENU once again. The display
shows the current time and the message
"AUTO".
7. Set the function selector (5) and the tem-
perature dial (1) to the desired positions.
The oven will automatically switch on at the
calculated switch-on time (here: 11:30) and
at the set switch-off time (here: 12:45).
8. To display or change the switch-off or
cooking time, follow points 1 to 5 again.
9. After the oven has switched off, an au-
dible alarm will sound for approx. 6 min-
utes, which you can switch off by briefly
pressing the MENU button.
10. Rotate the function selector (5) and the
temperature dial (1) to the "0" position.
11. Press the MENU button for approx. 3
seconds until the "AUTO" message dis-
.
appears. The display now once again
shows the current time.
Interrupting/ending fully
automated operation
To delete the selected settings, press both ar-
row keys simultaneously for longer (approx.
3 seconds). As a result, the "AUTO" message
disappears and the fully automatic mode is
cancelled.
Page EN-21
The timer