Changing The Oven Light - hanseatic 10153.3eETsDpHbX Gebrauchsanleitung

(12)
3. Remove the upper pane from the
mounts below the hinges and carefully
set it down.
4. Remove the middle pane and carefully
set it down.
5. Please ensure not to lose the small
spacers (12) and (13).
6. Clean all panes with warm, fresh water.
7. Dry the panes thoroughly.
8. Reposition the middle pane in the
mounts at the hinges.
9. Replace the spacers (12) and (13) at the
sides of the middle pane.
10. Reposition the upper pane in the mounts
at the hinges. Make sure that the smooth
side is facing outwards.
11. Put the grid plate back on top of the door
– it only fits in one direction. First insert
it on the left-hand side and then press
down on the right-hand-side until it clicks
into place.
(13)
Cleaning
12. Replace the oven door (see „Replac-
ing the oven door on its hinges" on
page EN-16).

Changing the oven light

You will need a heat-resistant oven bulb, type
230 V to 240 V, 25 W, E 14, T 300 °C.
Page EN-17