Spare Parts Order; Technical Data; Performance Data - FLORABEST FTP 400 A1 Originalbetriebsanleitung

GB MT

Spare Parts Order

When buying parts for the immersion
pump, use the service address or fax
number given.
Please enter your machine type and the
item number of the part you are ordering
or its position on the exploded drawing.
Backflow stop .............item No. 91045900
The backflow stop is subject to wear; its
replacement is not covered by guarantee.

Technical Data

Immersion pump ..................FTP 400 A1
Mains connection.................... 230 ~50Hz
Power consumption ........................400 W
Max. discharge rate. .................... 7000 l/h
Max. discharge head. ...................... 7.5 m
Max. depth of immersion. ................... 8 m
Max. water temperature....................35°C
Hose connection
inside thread .................. ½", ¾", 1", 1 ½"
Max. foreign body size:.................ø 8 mm
Mains cable ...................................... 10 m
Weight ............................................ 4.5 kg
Safety class ............................................. I
Degree of protection ......................... IPX8
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
50

Performance data

The maximum performance data are
measured with a straight, direct outlet
flow. The angle piece and backflow stop
may reduce performance.