Troubleshooting - Silver Crest 860 A1 Bedienungsanleitung

Troubleshooting

Faults
The appliance is not
working.
The food does not
get hot.
No steam is gener-
ated during the
"Steam" programme.
The display shows
E1, E2, E3, or E4.
You hear 5 beeps.
E5 appears in the
display. You hear
5 beeps.
If the malfunction cannot be corrected using one of the suggestions above, or if you have
found some other kind of malfunction, please contact our Customer Service department.
SMUD 860 A1
Cause
The power plug is not connected to the
mains power.
The mains power socket is defective.
The appliance is defective.
The wrong temperature level has been set.
The wrong programme has been set.
The water has been used up.
The appliance is defective.
The appliance has overheated.
Solution
Insert the plug into a
mains power socket.
Use a different mains
power socket.
Contact the Customer
Service department.
Set a higher
temperature or a
different programme.
Check the programme
setting.
Refill the appliance
with water.
Disconnect the plug
from the mains power
socket and contact
the Customer Service
department.
Remove the plug from
the power socket and
allow the device to
cool down completely.
You can then use the
appliance normally
again.
│ 33 ■
GB