Operation - Klarstein Downfire Handbuch

EN
20

OPERATION

Note: Before first use and after every gas cylinder change, gas delivery system must
be purged of air before igniting! To do this, turn the control knob anticlockwise to the
IGNITION setting. Press knob in and hold for 2mins before attempting ignition.
Lighting
ON/MAX
1. Perform leak testing prior to each use.
2. Open the valve on the gas cylinder.
3. Depressing and turn control knob anticlockwise to ON/MAX position, hold for 30
seconds or until burner will remain lit when the control knob is released.
4. If fails to light the burner, turn control knob to OFF and repeat above step after
2 mins.
5. Turn control knob to ON/MAX or MIN temperature position once the burner stays lit.
To extinguish
• Turn control knob clockwise to OFF.
• Close the valve of the gas cylinder or the regulator after use.
• Close the gas bottle and allow this appliance to cool before moving the appliance.
OFF
MIN