Operation - Klarstein JERSEY Bedienungsanleitung

EN
52

OPERATION

Information on how to save energy
• Reduce the opening time of the cover.
• Turn off the valve of the gas bottle as soon as the preparation process is
fi nished.
• Preheat the appliance for 10 - 15 minutes only (except when using it for the
fi rst time).
• Do not preheat the appliance for longer than recommended.
• Do not set the temperature of the appliance higher than required.
• Connect the hose and the gas pressure regulator of the gas bottle to the left
side of the appliance. Make sure the gas bottle is in a safe position and kept
away from heat.
• Make sure the gas bottle is in a safe position and away from heat sources.
• The diameter of the hose is 8 - 10 mm.
• The maximum length of the hose should be 1.5 metres.
CAUTION
Risk of burns! The grill cover must be open when the barbecue is
ignited. Make sure that your face is not directly above the burner
when lighting the barbecue.
Lighting the barbecue
The burner has the following ignition procedure:
Ignition with pilot gas control (main burner or main burner with side burner or
main burner with side burner and side burner):
• With all switches on the gas barbecue in the "Off " position, turn the gas
cylinder valve to the "On" position.
• To produce a spark, you must press the gas control knob (A) and hold it in this
position for 3-5 seconds to allow the gas to fl ow and then turn it anticlockwise
to "HIGH" (B).
• This allows the spark to pass to the burner tube (C). You will hear a "snapping"
sound from the igniter and see an orange fl ame coming out of the burner
tube on the left side of the burner (D).
• After the "snapping sound", keep the gas control knob pressed for another
two seconds to allow the gas to fl ow completely through the burner tube (E)
and ensure ignition.
• When the burner is lit, adjacent burners are also lit as soon as the grill switch
is turned to "HIGH".