Silvercrest SPM 2000 D2 Bedienungsanleitung Seite 31

NOTE
► The green control lamp "Ready" 5 also lights up when the heat level
control 2 is set to "MIN" or lower . As soon as you set the heat level
control 2 to the desired position, the green "Ready" control lamp 5 goes
out until the temperature has been reached .
NOTE
► The green "Ready" control lamp 5 may go out intermittently in the
meantime and the red "Power" control lamp 1 lights up . This indicates that
the temperature has briefly fallen below the set temperature and the
appliance is heating itself back up .
♦ Open the lid and place the food to be toasted/grilled on the lower hotplate 9 .
♦ Close the appliance lid using the handle 6 .
♦ Due to the sliding hinges fitted to the upper hotplate 9, it always lies parallel to
the lower hotplate 9 even with large quantities of food . This guarantees an
optimal grilling result .
♦ Check the browning of the food after a while . To do this, open the appliance lid
using the handle 6 .
NOTE
► Start with short grilling times and increase these until you have found the
correct duration .
♦ When you are satisfied with the level of browning, remove the food .
CAUTION
Damage to the appliance!
► Do not use pointed or sharp objects to remove the food . These could
damage the surfaces of the hotplates 9!
♦ Turn the heat level control 2 to the left stop and remove the plug 3 from the
mains power socket .
CAUTION
► Always remove the plug 3 from the mains power socket when the appliance
is not in use! It is not sufficient to simply set the heat level control 2 to the
left stop!
■ 28 │ GB │ IE
SPM 2000 D2