Design And Compliance Notes; Temperature Range - Kaisai KPPD SERIES Bedienungsanleitung

Design and Compliance Notes

Design Notice
The design and specifications are subject to change without prior notice for
product improvement. Consult with the sales agency or manufacturer for details.
Any updates to the manual will be uploaded to the service website, please check
for the latest version.
Energy Rating Information
The Energy Rating for this unit is based on an installation using an
un-extended exhaust duct
adaptor A (as shown in the Installation section of this manual).
Unit Temperature Range
Mode
Cool
Dry
Heat(pump heat
mode)
Heat(electrical
heat mode)
EN
NOTE: To be in compliance EN 61000-3-11, the product MPPDB-12HRN7-QB6G1 shall be connected only to
a supply of the system impedance: | Zsys|=0.348 ohms or less, the product MPPDB-12CRN7-QB6G1 shall be
connected only to a supply of the system impedance: | Zsys|=0.362 ohms or less. Before connect the product
to public power network, please consult your local power supply authority to ensure the power network meet
above requirement.
without window slider adaptor or wall exhaust

Temperature Range

17-35°C (62-95°F)
13-35°C (55-95°F)
5-30°C (41-86°F)
≤
30°C (86°F)
17
58