Installation Instructions; Preparation; Design Notice; Ambient Temperature Range For Unit Operating - Kaisai KPPH-09HRN29 Bedienungsanleitung

Installation Instructions

Preparation

NOTE:
All the illustrations in the manual are for explanation purpose only. Your machine may be slightly different.
The actual shape shall prevail. The unit can be controlled by the unit control panel alone or with the remote
controller. This manual does not include Remote Controller Operations, see the <<Remote Controller
Instruction>> packed with the unit for details.
d
d

Design Notice

In order to ensure the optimal performance of our products, the design specifications of the unit
and remote control are subject to change without prior notice.
Energy Rating Information
The Energy Rating for this unit is based on an installation using an un-extended exhaust duct without
nts. window slider adaptor (as shown in the Installation section of this manual).At the same time, the unit
must be operate on the COOL MODE and HIGH FAN SPEED by remote controller.
ll

Ambient Temperature Range For Unit Operating

MODE
er
s
Cool
nt
Dry
e

Exhaust hose installation

The exhaust hose and adaptor must be installed or removed in accordance with the usage mode. For
COOL,HEAT(heat pump type) or AUTO mode must be installed exhaust hose. For FAN, DRY or HEAT
(electrical heat type) mode must be removed exhaust hose.
control panel
remote signal receptor
horizontal louver control
lever(adjust manually)
NOTE: PHA can not be
adjusted.
vertical louver control
lever(adjust manually)
NOTE: PHA can not be
adjusted.
panel
Caster
front
Temperature Range
17-35°C (62-95°F)
13-35°C (55-95°F)
handle
(both sides)
air filter
upper air intake
drain outlet
air outlet
lower air intake
bottom tray
drain outlet
MODE Temperature Range
Heat(pump heat
5-30°C (41-86°F)
mode)
Heat(electrical
≥
30°C (86°F)
heat mode)
53
rear
EN