Herunterladen Inhalt Inhalt Diese Seite drucken

Installation; Accessories - Kaisai KPPD SERIES Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Installation

Choosing The Right Location
Recommend Installation
Tools Needed
EN
-Medium Philips screwdriver; -Tape measure or ruler; -Knife or scissors; -Saw (optional, to shorten window
adaptor for narrow windows)

Accessories

Check your window size and choose the fit window slider.
Part
Description
Unit Adaptor
Exhaust Hose
Window Slider Adaptor
Window Slider A
Window Slider A
Window Slider B
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Remote Controller
and Battery
NOTE: Items with
50cm
19.7inch
Quantity
single-exhaust
unit(MODEL A)
1 pc
1 pc
1 pc
1 pc
are optional. Slight variations in design may occur.
*
Your installation location should meet the following requirements:
-Make sure that you install your unit on an even surface to
minimize noise and vibration.
-The unit must be installed near a grounded plug, and the
Collection Tray Drain (found on the back of the unit) must be
accessible.
-The unit should be located at least 30cm (12") from the nearest
wall to ensure proper air conditioning.
-DO NOT cover the Intakes, Outlets or Remote Signal Receptor
of the unit, as this could cause damage to the unit.
NOTE:
All the illustrations in the manual are for explanation
purpose only. Your machine may be slightly different.
The actual shape shall prevail.
The unit can be controlled by the unit control panel
alone or with the remote controller. This manual does
not include Remote Controller Operations, see the
<<Remote Controll Illustration>> packed with the unit
for details.
When there are wide differences between
"INSTRUCTION MANUAL" and "Remote controll
Illustration" on function description, the description on
"INSTRUCTION MANUAL " shall prevail.
North America
Part
double-exhaust
unit(MODEL B)
2 pc
2 pc
2 pc
1 pc
1 pc
2 pc
2 pc
1 pc
1 set
9
50
Description
Bolt
Security Bracket and Screw
Drain Hose
Drain Hose Adaptor(only for
heat pump mode)
Power Cord Buckle
Window Slider C(optional)
*
Bolt(optional)
*
Foam Seal A (Adhesive)(optional)
*
Foam Seal B (Adhesive)(optional)
*
Foam Seal C (Non-adhesive)(optional)
*
Quantity
1 pc
1 set
1 pc
1 pc
1 pc
1 pc
1 pc
2 pc
2 pc
1 pc

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Kppd-12hrn29

Inhaltsverzeichnis