Unit Specifications And Features; Indoor Unit Display - Kaisai KCD-24 Bedienungsanleitung

Unit Specifications and Features

Indoor unit display

NOTE: Di erent models have di erent display panel. Not all the indicators describing below are available
for the air conditioner you purchased. Please check the indoor display panel of the unit you purchased.
Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit may be
slightly di erent. The actual shape shall prevail.
This display panel on the indoor unit can be used to operate the unit in case the remote control has
been misplaced or is out of batteries.
Air outlet
Louver
Air inlet
Display panel
(A-1)
Manual LED display Infrared
button receiver
FUNC
Manual LED display Infrared
button receiver
Manual LED display Infrared
button receiver
Air inlet
Air outlet
Louver
Display panel
(A-2)
Temperature
LED display
and
Infrared
receiver
Manual
button
• Operation indicator :
• Timer indicator :
• PRE-DEF indicator :
(pre-heating/defrost)
• Alarm indicator :
42
(A-3)
Louver
Air outlet
Air inlet
(B)
Display panel
Electric heating
( some models)
Louver
Air outlet
Air inlet
MANUAL button : This button selects the mode in the following order: AUTO, FORCED COOL, OFF.
•
FORCED COOL mode : In FORCED COOL mode, the Operation light flashes. The system will then
turn to AUTO after it has cooled with a high wind speed for 30 minutes. The remote control will be
disabled during this operation.
OFF mode : When the display panel is turned o , the unit turns o and the remote control is
re-enabled.
Display panel
LED Infrared Manual
display receiver button
Operation
Alarm
Timer
indicator
indicator
indicator
PRE-DEF
(pre-heating/defrost)
indicator
indicator
Alarm indicator
When wireless control
LED display
feature is activated
( some models)
Timer
PRE-DEF indicator
indicator
(pre-heating/defrost)
Operation
indicator
43