Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HANDLING THE REMOTE CONTROLLER
HANDLING THE REMOTE CONTROLLER
NOT SURE WHAT A FUNCTION DOES?
NOT SURE WHAT A FUNCTION DOES?
Refer to the How to Use Basic Functions
Refer to the How to Use Basic Functions
and How to Use Advanced Functions
and How to Use Advanced Functions
sections of this manual for a detailed
sections of this manual for a detailed
description of how to use your air conditioner.
description of how to use your air conditioner.
SPECIAL NOTE
SPECIAL NOTE
Button designs on your unit may differ
Button designs on your unit may differ
slightly from the example shown.
slightly from the example shown.
If the indoor unit does not have a particular
If the indoor unit does not have a particular
function, pressing that function s button on
function, pressing that function s button on
the remote control will have no effect.
the remote control will have no effect.
INSERTING AND REPLACING BATTERIES
INSERTING AND REPLACING BATTERIES
Your air conditioning unit comes with two
Your air conditioning unit comes with two
AAA batteries. Put the batteries in the
AAA batteries. Put the batteries in the
remote control before use:
remote control before use:
1. Remove the back cover from the remote
1. Remove the back cover from the remote
control, exposing the battery compartment.
control, exposing the battery compartment.
2. Insert the batteries, paying attention to
2. Insert the batteries, paying attention to
match up the (+) and (-) ends of the
match up the (+) and (-) ends of the
batteries with the symbols inside the
batteries with the symbols inside the
battery compartment.
battery compartment.
3. Install the back cover on.
3. Install the back cover on.
INSTALLING REMOTE CONTROL HOLDER
INSTALLING REMOTE CONTROL HOLDER
The remote controller can be attached to a wall
The remote controller can be attached to a wall
or stand by using a remote controller holder
or stand by using a remote controller holder
(optional part, not supplied with the unit).
(optional part, not supplied with the unit).
1.
1.
Before installing the remote controller, check
Before installing the remote controller, check
that the air conditioner receives the signals
that the air conditioner receives the signals
properly.
properly.
2. Install the holder with two screws.
2. Install the holder with two screws.
3. Put
3. Put
the remote controller in the holder.
the remote controller in the holder.
BATTERY NOTES
BATTERY NOTES
For optimum product performance:
For optimum product performance:
Do not mix old and new batteries, or
Do not mix old and new batteries, or
batteries of different types.
batteries of different types.
Do not leave batteries in the remote control
Do not leave batteries in the remote control
,
,
if you don t plan on using the device for
if you don t plan on using the device for
more than 2 months.
more than 2 months.
BATTERY DISPOSAL
BATTERY DISPOSAL
Do not dispose of batteries as unsorted
Do not dispose of batteries as unsorted
municipal waste. Refer to local laws for
municipal waste. Refer to local laws for
proper disposal of batteries.
proper disposal of batteries.
TIPS FOR USING REMOTE CONTROL
TIPS FOR USING REMOTE CONTROL
,
,
4 4
4 4
77
The remote control must be used within 8
The remote control must be used within 8
meters of the unit.
meters of the unit.
The unit will beep when remote signal is
The unit will beep when remote signal is
received.
received.
Curtains, other materials and direct
Curtains, other materials and direct
sunlight can interfere with the infrared
sunlight can interfere with the infrared
signal receiver.
signal receiver.
Remove batteries if the remote control
Remove batteries if the remote control
will not be used more than 2 months.
will not be used more than 2 months.
Remove the back cover
Remove the back cover
to install batteries
to install batteries
Put the remote controller
Put the remote controller
in the holder.
in the holder.
Werbung
Inhaltsverzeichnis
