How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation - Kaisai KPPD SERIES Bedienungsanleitung

2
1
EN
2
1
SET TEMPERATURE( C)
FAN
AUTO
COOL HIGH
DRY MED
HEAT LOW
TEMP
ON/OFF
MODE
FAN SPEED
SWING TIMER ON
ECONOMY
TIMER OFF
ION
RESET LOCK
FOLLOW
LED
TURBO
ME
DISPLAY
SET TEMPERATURE( C)
AUTO FAN
COOL HIGH
MED
DRY
LOW
HEAT
TEMP
ON/OFF
MODE
FAN SPEED
SWING TIMER ON
ECONOMY
TIMER OFF
ION
RESET LOCK
FOLLOW
LED
TURBO
ME
DISPLAY

How to use the buttons

Auto operation

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the MODE button to select Auto.
3
2. Press the TEMP button to set the desired
temperature. The temperature can be set
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
increments.
3. Press the ON/OFFbutton to start the air
conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
Dehumidifying by sensing the difference between the
actual ambient room temperature and the set temper-
ature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL, HEAT,
(cooling & heating models only) or FAN mode.
2. Press the TEMP button to set the desired
4
temperature. The temperature can be set
3
within a range of 17 C(62 F)~ 30 C in 1 C(2 F)
increments.
3. Press the FAN SPEED button to select the
fan speed in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
7
68