Battery Notes; Battery Disposal - Kaisai FLY KWX-09 Bedienungsanleitung

HANDLING THE REMOTE CONTROLLER
NOT SURE WHAT A FUNCTION DOES?
Refer to the How to Use Basic Functions
and How to Use Advanced Functions
sections of this manual for a detailed
description of how to use your air conditioner.
SPECIAL NOTE
Button designs on your unit may differ
slightly from the example shown.
If the indoor unit does not have a particular
,
function, pressing that function s button on
the remote control will have no effect.
INSERTING AND REPLACING BATTERIES
Your air conditioning unit comes with two
AAA batteries. Put the batteries in the
remote control before use:
1. Remove the back cover from the remote
control, exposing the battery compartment.
2. Insert the batteries, paying attention to
match up the (+) and (-) ends of the
batteries with the symbols inside the
battery compartment.
3. Install the back cover on.
INSTALLING REMOTE CONTROL HOLDER
The remote controller can be attached to a wall
or stand by using a remote controller holder
(optional part, not supplied with the unit).
1. Before installing the remote controller, check
that the air conditioner receives the signals
properly.
2. Install the holder with two screws.
3. Put the remote controller in the holder.

BATTERY NOTES

For optimum product performance:
Do not mix old and new batteries, or
batteries of different types.
Do not leave batteries in the remote control
,
if you don t plan on using the device for
more than 2 months.

BATTERY DISPOSAL

Do not dispose of batteries as unsorted
municipal waste. Refer to local laws for
proper disposal of batteries.
TIPS FOR USING REMOTE CONTROL
The remote control must be used within 8
meters of the unit.
The unit will beep when remote signal is
received.
Curtains, other materials and direct
sunlight can interfere with the infrared
signal receiver.
Remove batteries if the remote control
will not be used more than 2 months.
Remove the back cover
to install batteries
Put the remote controller
in the holder.
72
Remote LCD Screen Indicators
Information are displayed when the remote controller is powered up.
ON/OFF display
Appears when the unit
is turned on, and disappears
when the it is turned off.
Transmission Indicator
Lights up when remote
sends signal to indoor
unit
MODE display
Displays the current
mode, including:
TIMER ON display
( )
Displays when TIMER
ON is set
TIMER OFF display
( )
Displays when TIMER
OFF is set
Silence feature
Not available for
display
this unit
Follow me feature
Not available for
display
this unit
LOCK feature
Sleep mode display
display
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
operation only the relative functional signs are shown on the display window.
73
Not available for
this unit
Battery display
Low battery detection
Temperature/Timer display
Displays the set temperature
by default, or timer setting
when using TIMER ON/OFF
functions
Temperature range:
17-30 C o
Timer setting range:
0-24 hours
This display is blank when
operating in FAN mode.
Fan speed display
Displays selected fan speed:
Low speed
Medium speed
High speed
Auto fan speed
This fan speed can not be
adjusted in AUTO or DRY
mode.