Kaisai KPPD SERIES Bedienungsanleitung Seite 66

Function buttons(continued)
AUTO
COOL
DRY
HEAT
Model: R51I9/BG(C)E,
EN
NOTE:
ION,FOLLOW ME and TURBO
button:Optional function.
RG51I13/BG(C)EFU is SLEEP
button instead of ECONOMY
button.
SET TEMPERATURE( F)
FAN
HIGH
MED
LOW
TEMP
ON/OFF
MODE
FAN SPEED
SWING TIMER ON
ECONOMY
TIMER OFF
ION RESET LOCK
FOLLOW
LED
TURBO
ME
DISPLAY
R51I10/BG(C)E,
R51I11/BG(C)E,
R51I12/BG(C)E,
RG51I38/BG(C)EFU,
RG51I13/BG(C)EFU.
10 TIMER ON Button
Press this button to activate the Auto-on time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-on time setting, just press the button until
the time setting is 0.0.
11 ECONOMY/SLEEP Button
Select this function during the sleeping time. It
can maintain the most comfortable temperature
and save energy. This function is available on
COOL, HEAT or AUTO mode only .
NOTE: While the unit is running under ECONOMY/
SLEEP mode, it would be cancelled if press MODE,
FAN SPEED or ON/OFF button.
12
TIMER OFF Button
Press this button to activate the Auto-off time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until
the time setting is 0.0.
13 LOCK Button
Press this recessed button to lock all current
settings, and the remote controller will not accept
any operation except that of the LOCK. Use the
LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK
button again to cancel the LOCK function. A lock
symbol will appear on the remote controller display
when the lock function is activated.
Turbo Button(optional)
14
Used to start or stop the speed cooling/
heating.
(Speed cooling/heating operates super
high fan speed in cooling/heating mode.)
Note: The unit system will automatically
revert back to the previous settings after
continue operating under speed cooling
mode for about 20 minutes.
LED Display Button
15
Press this button to clear the display on the
indoor unit, press it again to light the display .
5
66