Assembling The Feet - philrouge EOS Montage- Und Bedienungsanleitung, Pflegehinweise

Electric Boxspring

3. Assembling the feet

Number of feet
Boxspring single bed (80/90/100 cm)
Set of 4 feet
Boxspring double beds (160/180/200 cm)
Set of 4 feet and 1 connecting foot set
70
FR FR
EN EN
Electric Boxspring
3. Assembling the feet
Assembly with high room height
3.1 Place the Boxsprings with the mattress side
against the wall.
Take care to ensure that the head section of the
1
bed is on the floor.
A
B
B
A
3.3 Please note: provisionally set the height of the
connecting feet by comparing them with the height
of the corner feet.
Fasten the connecting feet in the drill holes provided in position C with the screws
(Parts 006). Tighten the screws only one on side so that the bracket can still be
adjusted. The other side will be pulled tight after assembly of the head section.
3.2 Assembling the feet
A A
A
A
B
B
B
C
C
B
Assembling the feet with threaded screws
Screw the feet into the holes provided using
threaded sleeves. You can mount the feet on
the outer corners (A) or set back in position (B).
C
C
B
B
A
B
A
A
Assembly
plate on base
Assembling the wood or chrome angled feet
Fasten the feet at the corners with wood screws
(Parts 007). The feet can be freely positioned
C
on the assembly plate of the base (e.g. if you
wish to mount them set back).
Wooden foot Chrome foot
FR FR
EN EN
or
oder
71