Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electric Boxspring
2. Installing the motor
2.3 Place the motor on the motor rods, taking the head
and foot direction into account. Engage the motor into
the elements on the cross bracings.
Always install the motor
in the correct direction. Verify
the head and foot symbols.
Head
Foot
2.4 Close the covers of the motor
compartments.
68
FR
FR
EN
EN
Electric Boxspring
2. Installing the motor
2.5 If under-bed LED lighting is provided, you
should now assemble these first and then connect
them. The power unit (6) and mains cable (7) can
be con nected once the boxspring is assembled.
For this, please see the instructions enclosed with
the com ponents.
The retaining brackets allow the LED module to
be mounted at an angle of 0° or 45°.
Attention:
The plug assignment is evident from the number
of pins. Do not force the plug in, as this can cause
the plug pins to become bent.
FR
FR
EN
EN
Strain relief grip
Under-bed LED lighting
Cable for synchronised
adjustment
69
Werbung
Kapitel
