philrouge EOS Montage- Und Bedienungsanleitung, Pflegehinweise Seite 33

Fixed Boxspring
1. Assembling the feet
Assembly with high room height
1.1 Place the Boxsprings with the mattress side
against the wall.
A A
A
A
B B
B B
C
C
C
C
B
B
A
B
A
B
A
Assembly plate
A
on base
C
1.3 Please note: provisionally set the height of the
connecting feet by comparing them with the height
of the corner feet.
Fasten the connecting feet in the drill holes provided in position C with the screws
(Parts 001). Tighten the screws only one on side so that the bracket can still be
adjusted. The other side will be pulled tight after assembly of the head section.
62
FR
EN
1.2 Assembling the feet
A
oder
or
B
Assembling the feet with threaded screws
Screw the feet into the holes provided using
threaded sleeves. You can mount the feet on the
outer corners (A) or set back in position (B).
Assembling the wood or chrome angled feet
Mount the feet on the corners using wood screws
(Part 002). The feet can be freely positioned on
the assembly plate of the base (e.g. if you wish
to mount them set back).
Wooden foot Chrome foot
FR
EN
Fixed Boxspring
1. Assembling the feet
1.4 Tilting the box
A Velcro fastener which prevents the boxes from
drifting apart when 4 feet per box are used
(i.e. without center feet) is attached at the foot end.
FR
EN
When tilting the box, do not tilt with
the weight on the feet. Danger of breaking!
FR
EN
63