Setting Font Level; Setting Large Idle Font; Setting Extra Zoom - Motorola MTP810Ex Funktionsbenutzerhandbuch

• On — to activate this feature.
• Off — to deactivate this feature.
4.8.7.2

Setting Font Level

When and where to use: To increase/decrease text size so you can adjust the interface readability to
existing conditions.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Display → Font Level.
3 Select one of the following:
• 1 – small font size
• 2 – medium font size
• 3 – large font size
NOTICE: In some languages number of available font levels can be limited.
4.8.7.3

Setting Large Idle Font

When and where to use: To enable/disable large font on the home screen.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Display → Large Idle Font.
3 Select On to enable, or Off to disable displaying large font on the home screen.
NOTICE: Large Idle Font is not available in some languages.
4.8.7.4

Setting Extra Zoom

Enabling Extra Zoom simultaneously changes three settings;
• switches Font Level to the largest possible one,
• activates Large Idle Font, and
• sets Extended Status Icons to Idle Only.
If you modify any of these settings, for example decrease the font level, the radio leaves the Extra
Zoom Mode. However, to restore all the three previous settings, you need to manually change the
values of Font Level, Large Idle Font, and Extended Status Icons. If you cannot restore a setting,
contact your service provider.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Display → Extra Zoom.
3 Select On to enable or Off to disable Extra Zoom.
Send Feedback
6866588D06–RB (en-US)
Chapter 4: Main Menu
81