Motorola MTP810Ex Funktionsbenutzerhandbuch Seite 29

Icon Description
• Blinking – when the radio has not detected the repeater or during attachment.
• No icon – during a radio to radio and gateway call.
General Icons
All Tones Off and Duplex and Simplex Ring Muted – Indicates that all alert tones are
off and both duplex and simplex ring volume is set to 0.
• Volume is set to 0 (when Volume Adj. Mode is set to Common).
• Both simplex and duplex ring volume is set to 0 (when Volume Adj. Mode is set
to Individual).
Simplex Ring Muted – Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.
Duplex Ring Muted – Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0.
Vibrate Only – Indicates that the radio vibrates to alert you of an incoming call.
Vibrate then Ring – Indicates that the radio vibrates and then rings to alert you of an
incoming call.
Low Audio – Indicates that the audio mode is changed to low.
High Audio – Indicates that the audio mode is changed to high.
Audio Profile Selected – Indicates that an audio profile associated with a particular
/ /
icon is active. The icons can be either solid or blinking. For details on audio profiles
available on the radio, contact your service provider.
/ /
Earpiece Connected – Indicates that the earpiece is connected.
GPS Icon
• Solid – the radio has a location fix.
• Blinking – the radio is acquiring a location fix. This is an optional setting and may
not be enabled on your radio.
Battery Strength – Shows the charge of your battery.
Battery Charging – Indicates that the battery is charging.
Emergency – Indicates that the radio is in Emergency Operation.
• Solid – Emergency Operations initiated.
• Blinking – the radio is in emergency receiving state.
Disaster Alert Call – Indicates that the radio is in Disaster Alert Call.
Send Feedback
6866588D06–RB (en-US)
Chapter 2: Getting Started
Table continued...
29