Additional Address; Enabling Or Disabling Additional Address; Selecting Additional Address; Viewing Additional Address - Motorola MTP810Ex Funktionsbenutzerhandbuch

4 Do one of the following:
• Enter the number or press abc to select the name from your contact list. Press Send.
• Select required talkgroup from the TalkGroup List.
The display shows one of the following delivery reports:
•
Status Sent.
•
Status Failed.
4.3.9

Additional Address

The Additional Address feature allows the radio to send RMS messages, and Local Information
Protocol (LIP) reports to additionally defined recipients.
The default addresses where the radio sends RMS messages and LIP reports are defined by your
service provider. If an Additional Address is selected and enabled, RMS messages and LIP reports are
also sent to the recipient defined in the Additional Address.
You can create, edit, and delete Additional Addresses using the radio menu. If an Additional Address is
configured by your service provider, the service provider can disable edition and deletion of the
address using the radio menu.
You can define up to 30 Additional Addresses.
4.3.9.1

Enabling or Disabling Additional Address

Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Additional Address → Enable.
3 Select one of the following:
• On – to activate the feature
• Off – to deactivate the feature
4.3.9.2

Selecting Additional Address

Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Additional Address → Select Address.
Select Address display appears with an available list of aliases.
3 Scroll through the list to highlight your alias and press Select.
4.3.9.3

Viewing Additional Address

Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Additional Address → Select Address.
Send Feedback
6866588D06–RB (en-US)
Chapter 4: Main Menu
63