Setting Periodic Alert; D-Ptt Tones; Setting D-Ptt Tones; Display - Motorola MTP810Ex Funktionsbenutzerhandbuch

6866588D06–RB (en-US)
Chapter 4: Main Menu
4.8.6.5.1

Setting Periodic Alert

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Tones → Periodic Alert.
3 Select one of the following:
• Alert — Activates/deactivates periodic tone.
• Period — Indicates the time between each periodic tone.
4.8.6.6

D-PTT Tones

This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in
idle or the Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, you can press and hold the PTT button once again to get the
permission to talk. Otherwise, if you press the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent keeping the PTT button pressed, it results in permission to talk.
The D-PTT tone is sent over the air but is not audible on the sending radio.
4.8.6.6.1

Setting D-PTT Tones

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Tones → D-PTT Tones.
3 Select one of the following:
• D-PTT Mode — Activates/deactivates D-PTT tone.
• Tone Style— Indicates how many times the D-PTT tone is played.
4.8.7

Display

This menu item allows you to adjust your radio display settings.
4.8.7.1

Setting Flip Display

When and where to use:
The feature is useful for a user who has to wear the radio on a shoulder, belt, or lapel and at the same
time wishes to read the display upside down.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Display → Flip Display.
3 Select one of the following:
80 Send Feedback