Aux In Mode - Silvercrest SKBL 56 A1 Bedienungsanleitung

Functions of the button
NOTE
► Depending on the smartphone used, not all functions described will be
available.
Function
Accept call Press 1 x (for incoming call).
End call Press 1 x (during call).
Press and hold for approx. 2 seconds (for incom-
Reject call
ing calls).
Call last-dialled
Press 2 x
number

AUX IN mode

You can also listen to music from an audio device connected via a 3.5 mm
jack cable . In AUX IN mode, stereo operation is not possible. An existing
® connection is terminated.
Bluetooth
♦ Make sure that both speakers are switched off.
■ 30 │ GB│IE
♦
♦
button
♦
♦
♦
NOTE
► If you connect a 3.5 mm jack cable
Bluetooth
back from the connected device.
Press and hold the button for about 2 seconds to turn a
speaker on. You will hear a beep and the operating/charging LED
flashes alternatively orange and blue.
Use a 3.5 mm jack cable to connect the audio device to the 3.5
mm jack socket (AUX IN) of the speaker. The operating/charging
LED flashes every second blue.
Start playback on the audio device and set the volume to a moderate
level.
Then set the desired volume using the
button on the speaker.
Press the button if you want to mute the speaker.
operation, the speaker will automatically switch to play-
®
button or the
to one of the speakers during
SKBL 56 A1