You can now use the speaker to listen to your favourite tunes wirelessly.
NOTE
►
The next time you turn on the speakers they will connect automatically
to the last-connected Bluetooth
does not automatically reconnect, you will have to re-establish the
connection manually. A detailed description of how to do this can be
found in the operating instructions for your Bluetooth
►
If you want to connect the speaker to another Bluetooth
you must first unpair the current Bluetooth
down the
button and the
affected speaker for about 2 seconds until you hear a beep. Alterna-
tively, you can terminate the connection on your Bluetooth
In this case, you will also hear a beep.
SKBL 56 A1
device. If your Bluetooth
device
®
®
device.
®
device,
®
device. To do this, hold
®
button (
) of the
device.
®
Operating the speakers in stereo mode
You can also operate both speakers at the same time from the same Bluetooth
device. Then each speaker will play back one audio channel.
♦
Make sure that the speakers are switched off and the Bluetooth
device is switched on.
♦
Set the Bluetooth
device so that it scans for other Bluetooth
®
devices. A detailed description of how to do this can be found in the
operating instructions for your Bluetooth
♦
Press and hold the
speaker on and activate the Bluetooth
and the operating/charging LED
blue. If the speaker connects automatically to an already paired
playback device, then terminate this connection. To do
Bluetooth
®
this, hold down the
of the affected speaker for about 2 seconds until you hear a beep.
device.
®
button for about 2 seconds to turn a
®
function. You will hear a beep
flashes alternatively orange and
button and the
button (
GB│IE
│
®
®
®
)
27
■