Stereo Mode With Two Speakers - Silvercrest SBLP 4.2 A1 Bedienungsanleitung Und Sicherheitshinweise

Volume down*
Disconnect Bluetooth
Change operating mode
(Bluetooth®/ AUX IN)
* An acoustic signal is played when the minimum or maximum volume is
reached.
1
You will hear a confirmation tone in the speaker. Subsequently the
®
Bluetooth connection has to be re-established.

8.3 Stereo mode with two speakers

Stereo mode requires two SilverCrest SBLP 4.2 A1 speakers. Proceed as
follows to pair the speakers with your smartphone or player in stereo mode:
 Hold down the on/off button (1) briefly to switch on each of the two
speakers. You will then hear an acoustic signal that gradually increases in
volume and the operating LED (7) will flash blue. The speaker is now in
pairing mode.
If a connection has not been established, the speaker will
switch itself off after approximately five minutes.
Hold down the - button (4)
® 1
Briefly press the Bluetooth
Briefly press the M button (2)
SilverCrest SBLP 4.2 A1
®
button (3)
English - 45