Configuration And Set-Up; Preparation; Connection Via Ethernet; Scope Of Applications - Telecom Behnke 20-2907-IP Bedienungsanleitung

Instructions Behnke IP camera
GB GB

Configuration and Set-up

ConfigurAtion And set-up
2.

2.1. Preparation

▸
Connect the IP camera to a 100 Mbit Ether-
net LAN
▸ Power supply via Power over Ethernet (PoE)
(1.6 on page 49)

Connection via Ethernet

The IP camera is set up as a DHCP client, i.e. it
obtains its IP address from a DHCP server. Use
Behnke IP video software to locate existing
cameras within your network. Where the
camera is directly connected to PORT2 on the
SIP basic electronics, the camera's IP address
will also be displayed in the door intercom's
web frontend.
Where the camera is connected to a network,
in which no DHCP server is available, the
camera will automatically assign itself a free
IP address within the network 169.254.0.0/16.
It is also possible to have Behnke's IP video
software locate the camera, provided the
computer operates within the same network
segments.
52

Scope of applications

1. Using the IP camera with app functionality ▸
In case you want to use the camera together
with your smartphone and the „TC Behnke"
app please have a look at chapter „The app
functionality of the SIP app „TC Behnke"" on
page 59.
2. Using the IP camera with a PC and the
Behnke IP video software ▸ Please have
a look at the separate instructions on IP
video software configuration as well as the
system requirements on page 44. The IP
video software is available for download
at: www.behnke-online.de/downloads/
software
www.behnke-online.com