Using The App; During The Call - Telecom Behnke 20-2907-IP Bedienungsanleitung

Instructions Behnke IP camera
GB GB
The app functionality of the SIP app „TC Behnke"

4.6. Using the app

The app is divided into two parts: Live Video
and History. Depending on their authorisation
setting, the user may access the camera's live
video feed at all times or only when there is a
connected call from the door.

During the call

On this screen you will see the video feed
from the door camera. The bar
of the screen indicates video reception either
via local or mobile data connection. Transmis-
sion quality is indicated by bar colour and bar
length (red: poor, green: good).
70
The lower list
all the door intercom devices set-up on this
smartphone. Pressing the respective row in
the list will deliver the video feed from the cor-
responding door intercom device. Should you
lack the necessary authorisation to access
live video feed outside of a connected call (cf.
"User administration"), you will instead see a
blue screen with the Behnke logo. A green dot
indicates an accessible cameras, inaccessible
cameras are marked with a red dot. A tele-
phone receiver indicates an incoming call.
Tap the "Open Door
open door function on relay 1; use the key
to trigger the door intercom's relay 2. Please
bear in mind which relay operation modes
were set for the door intercom. The functions
for these keys depend on the relay operation
modes of your door intercom. Use the "Lights
on " to activate the IR illumination and the
camera's night view mode.
Please note:
Items
at the top
available when using IP
cameras with B-Smart
function (20-/21-/50-2907A-IP,
43-9587A, 50-1204A/-1207A), because
the analogue Behne intercom is used in
conjunction with the APP.
provides an overview over
" key to trigger the
und are not
www.behnke-online.com