Reset To Default Settings - Telecom Behnke 20-2907-IP Bedienungsanleitung

Instructions Behnke IP camera
GB GB
The app functionality of the SIP app „TC Behnke"

4.7. Reset to default settings

(For camera series 20/50 remove the camera cover before the reset)
The camera may be returned to default
settings after initialisation (approx. 2 min-
utes after power on) when the red LED
permanently illuminated.
Please press the reset button
pressed for at least three seconds.
72
The red LED
the reset button and increases the flashing
is intervals once the button is let go. After-
wards, the camera will reboot.
and keep it As soon as the red indicator LED
again permanently illuminated, the camera
has been returned to its default settings and
is ready to go.
starts flashing upon pressing
is once
www.behnke-online.com