Telecom Behnke 20-2907-IP Bedienungsanleitung Seite 69

Tap "ring tone " and choose from the list
provided:
Please note:
Items and are not
available when using IP
cameras with B-Smart
function (20-/21-/50-2907A-IP,
43-9587A, 50-1204A/-1207A), because the
APP cannot be used as a SIP subscriber here.
www.behnke-online.com
The app functionality of the SIP app „TC Behnke"
After tapping the "Caller"
screen appears:
Enter the telephone number for the SIP door
intercom, which the app may call. Calls from
other telephone numbers will not be con-
nected. Please enter the telephone numbers
your SIP door intercom will dial to reach this
device in the tab "telephone numbers
This is necessary e.g. when the SIP door inter-
com shall call a group of extensions. In this
case, you not only need to enter the telephone
number of your mobile device but also the
telephone number of this group extensions.
To add telephone numbers, please follow the
same steps as described in setting up the
"user administration" on page 67.
Tap "Save
"Delete " will remove the respective video
door intercom from the app's configuration.
Instructions Behnke IP camera
key, the following
" to end the process. Tapping
GB
".
69