Replacement Of The Fuses - mectron Piezosurgery touch Gebrauchs- Und Wartungshandbuch

09.3 Û REPLACEMENT OF THE FUSES
WARNING: Switch the device off.
Always turn the device off with the
main switch and disconnect it from
the electrical power socket before
EN
performing the following intervention.
Apply leverage with a flat screwdriver,
inserting its tip in the seat of the fuse-
holder drawer located under the power
supply socket;
Pull out the fuse-holder drawer;
WARNING: Replace the fuses,
complying to the characteristics
indicated in Chapter 08 - TECHNICAL
DATA
Reinsert the drawer in its housing.
32
1
2
3