Parkside PTSG 140 B2 Originalbetriebsanleitung Seite 20

GB IE
• Store unused power tools safely.
Unused power tools should be stored in
a dry, high or locked place, out of the
reach of children.
• Do not overload your power
tool. They work better and more safe-
ly within the speciied power range.
• Use the correct power tool.
- Do not use low-performance machines
for heavy work.
- Do not use the power tool for purpo-
ses for which it is not intended. For ex-
ample, do not use use a circular hand
saw for cutting tree branches or logs.
• Wear suitable clothing
- Do not wear loose clothing or jewel-
lery that might become caught in mo-
ving parts.
- When working outdoors, non-slip
footwear is recommended.
- Wear a hair net to contain long hair.
• Use protective equipment
- Wear safety goggles.
- Use a dust mask for work which gene-
rates dust.
• Connect a dust extraction de-
vice. If connections are available for
dust extraction and collection devices,
make sure that these are connected
and properly used.
• Do not use the cable for purpo-
ses for which it is not intended.
Do not use the cable to pull the plug
from the socket. Protect the cable from
heat, oil and sharp edges.
• Secure the workpiece. Use jigs or
a vice to hold the workpiece securely.
This is safer than using your hand.
• Avoid abnormal body postures.
Ensure secure footing and keep your
balance at all times.
• Maintain tools with care
- Keep cutting tools sharp and clean for
better and safer working.
20
- Follow the instructions for lubrication
and changing tools.
- Regularly check the connection cable
of the power tool and, if it is dama-
ged, have it replaced by a qualiied
specialist.
- Check extension cords periodically and
replace them if they are damaged.
- Keep handles dry, clean and free
from oil and grease.
• Remove the plug from the mains
socket when the power tool is not in
use, before maintenance and when
changing tools such as saw blades,
drill bits, cutters.
• Do not allow any tool keys to
remain inserted. Check, before
switching on, that keys and adjusting
tools have been removed.
• Avoid unintentional starting.
Make sure that the switch is off when
inserting the plug into the socket.
• Use extension cables outdoors.
Only use approved and appropriately
marked extension cables outdoors.
• Pay attention at all times. Pay
attention to what you are doing. Work
using common sense. Do not use the
power tool if you cannot concentrate.
• Check the power tool for possib-
le damage
- Before further use of the power tool, sa-
fety devices or slightly damaged parts
must be carefully examined in respect of
their proper and intended function.
- Check that the moving parts are wor-
king properly and are not jammed or
whether parts are damaged. All parts
must be correctly itted and satisfy all
conditions to ensure the proper opera-
tion of the power tool.
- Damaged safety equipment and parts
must be repaired properly or replaced
by an authorised specialist workshop